24" Shoes / 6-Way Blade / Ripper

Engine Model	Cat C7.1
Flywheel Power	166.0 HP
Bore	4.1 in
Stroke	5.3 in
Displacement	433.0 in³
Emissions	U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 Final
Engine Power - Maximum - At 2,200 rpm - ISO 14396	178.0 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349 (DIN)	168.0 HP
Engine Power - Maximum - At 2,200 rpm - ISO 14396 (DIN)	180.0 HP
Net Power - 1,800 rpm - ISO 9249/SAE J1349	166.0 HP
Engine Power - Maximum - At 2,200 rpm - SAE J1995	182.0 HP
Note (1)	Net power advertised is the power available at the engine flywheel when the engine is equipped with the air cleaner, muffler, alternator, cooling fan at maximum speed.
Note (3)	All non-road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
Note (2)	No derating required up to 3000 m (9,840 ft) altitude, beyond 3000 m (9,840 ft) automatic derating occurs.
Note (4)	Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

 

TRANSMISSION

1.0 Forward	2.1 mile/h
1.5 Forward	2.7 mile/h
2.0 Forward	3.6 mile/h
2.5 Forward	4.7 mile/h
3.0 Forward	6.1 mile/h
1.0 Reverse	2.5 mile/h
1.5 Reverse	3.4 mile/h
2.0 Reverse	4.4 mile/h
2.5 Reverse	5.9 mile/h
3.0 Reverse	7.6 mile/h
0.7 Forward	1.7 mile/h
0.5 Reverse	1.9 mile/h
0.5 Forward	1.6 mile/h
1.0 Forward (EU)	1.9 mile/h
0.5 Forward (EU)	1.5 mile/h
2.7 Forward	5.2 mile/h
1.7 Forward	3.0 mile/h
0.7 Forward (EU)	1.6 mile/h
1.7 Reverse	3.7 mile/h
Maximum Drawbar Pull - 3.0 Forward	25403.0 lbf
Maximum Drawbar Pull - 1.0 Forward	71939.0 lbf
0.7 Reverse (EU)	1.9 mile/h
2.7 Reverse	6.5 mile/h
0.5 Reverse (EU)	1.8 mile/h
Maximum Drawbar Pull - 2.0 Forward	44512.0 lbf
1.0 Reverse (EU)	2.2 mile/h
0.7 Reverse	2.1 mile/h

 

SERVICE REFILL CAPACITIES

Fuel Tank	73.2 gal (US)
Cooling System	10.6 gal (US)
Engine Crankcase	4.5 gal (US)
Power Train	42.3 gal (US)
Final Drive - Each	1.8 gal (US)
Hydraulic Tank	7.8 gal (US)
DEF Tank	5.0 gal (US)

 

WEIGHTS

Operating Weight	36943.0 lb
XL SU - Blade	5732.0 lb
XL VPAT Landfill	2912.0 lb
Multi-Shank Ripper - With 3 Shanks	2959.0 lb
XL VPAT Foldable	2762.0 lb
Operating Weight - XL	36943.0 lb
Shipping Weight - XL	36153.0 lb
XL VPAT Blade	2341.0 lb
Shipping Weight - XL Waste Handler	40029.0 lb
Operating Weight - XL Waste Handler	40818.0 lb
Shipping Weight - XL Fine Grading	37373.0 lb
Operating Weight - XL Fine Grading	38162.0 lb
Note (2)	Shipping Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 5% fuel, and Cat Comfort Series Air Suspension Seat.
Note (1)	Operating Weight: Includes EROPS, A/C, lights, VPAT dozer, transmission, drawbar, engine enclosure, 3-valve hydraulics, 100% fuel, and Cat Comfort Series Air Suspension Seat and operator.

 

UNDERCARRIAGE

Note (1)	*ISO 16754
Shoes/Side - XL	40
Ground Pressure - XL*	6.7 psi
Ground Contact Area* - XL	5518.0 in²
Track on Ground - XL	102.6 in
Track Gauge - XL	74.4 in
Grouser Height - XL	2.6 in
Track Rollers/Side - XL	7
Shoe Width - XL	24.0 in
Track on Ground - XL - Fine Grading	122.4 in
Ground Contact Area* - XL - Fine Grading	6479.0 in²
Ground Pressure* - XL - Fine Grading	5.8 psi
Track Rollers/Side - XL - Fine Grading	8
Shoes/Side - XL - Fine Grading	46
Grouser Height - XL - Fine Grading	2.6 in
Track Gauge - XL - Fine Grading	74.4 in
Shoe Width - XL - Fine Grading	24.0 in
Note (2)	All dimensions with SystemOne undercarriage.

 

BLADES

Width - XL VPAT	10.75 ft
Capacity - XL VPAT	4.3 yd³
Width - XL SU	10.33 ft
Capacity - XL SU	5.6 yd³

 

RIPPER

Maximum Clearance Raised - Shank Tip	24.5 in
Weight - With Three Shanks	3444.0 lb
Maximum Penetration - XL	20.2 in
Maximum Penetration Force - XL	11600.0 lbf
Shank Gauge	6.6 ft
Pocket Spacing	3.3 ft
Maximum Pry-out Force - XL	47480.0 lbf
Shank Section	73 mm × 176 mm (2.9 in × 6.9 in)
Each Additional Shank	172.0 lb
Type	Fixed Parallelogram
Number of Pockets	3
Overall Beam Width	86.7 in
Beam Cross Section	216 mm × 254 mm (8.5 in × 10.0 in)

 

WINCH

Maximum Bare Drum - Line Speed	141.0 ft/min
Maximum Full Drum - Line Speed	217.0 ft/min
Rope Diameter - Recommended	0.875 in
Maximum Full Drum - Line Pull*	44410.0 lb
Maximum Bare Drum - Line Pull*	69200.0 lb
Winch Drive	Mechanical
Drum Capacity - 22 mm (0.88 in)	288.75 ft
Overall Width	38.4 in
Cable Ferrule Size - O.D. × Length	54 mm × 67 mm (2.13 in × 2.63 in)
Winch Model	PA55
Winch Case - Width	38.4 in
Control	Electric
Note (1)	*Weight: Includes pump, operator controls, oil, mounting brackets and spacers.
Note (2)	Slow and standard speed winches are available.
Weight*	2814.0 lb
Oil Capacity	19.55 gal (US)
Winch and Bracket Length	45.1 in
Drum Diameter	10.0 in
Drum Width	12.4 in
Flange Diameter	19.8 in

 

STANDARDS

FOPS	FOPS (Falling Object Protective Structure) meets ISO 3449-2005 Level II.
ROPS	ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria ISO 3471:2008.
Brakes	Brakes meet the standard ISO 10265:2008.

 

SUSTAINABILITY - SOUND AND VIBRATION LEVELS

Sound Levels - Maximum Sound Power Level - 2000/14/EC	110.0 dB(A)
Sound Levels - Dynamic Operator Sound Pressure Level (LpA) - ISO 6396:2008	76.0 dB(A)
Sound Levels - Average Exterior Sound Pressure Level - SAE J88:2006	85.5 dB(A)
Note	*Values are for an experienced operator in a dozing application, consult the Operating and Maintenance Manual for details.
Vibration Levels - Maximum Hand/Arm* - ISO 5349:2001	2.5 m/s2 (8.2 ft/s2)
Vibration Levels - Seat Transmissibility Factor - ISO 7096:2000 - Spectral Class EM6	Less Than 0.7
Vibration Levels - Maximum Whole Body* - ISO/TR25398:2006	0.5 m/s2 (1.6 ft/s2)